AG device
Date: Thursday, September 23, 2004 @ 20:47:19 MST
Topic: Devices

From JLNlabs yahoo group: (From: Bill)

I have been working on this project for over 20 yrs. On Sept. 1 at 2:18 PM a "device" that I have been working on functioned as it was intended. I hesitate to use the words -antigravity because of the stigma so associated with the very concept bu t my "devise" on a 1 gram sensitive digital scale "appeared" to lose 7 grams when it was turned on. O course I had to be suspect that the scale was being influenced by the electronics of the "device". The best way to prove the validity of the "device" was to construct a balance beam.

After placing the "device" on one end and a counter weight on the other and calibrating the balance as close as possible by moving push pins up and down the bar I turned the "device" on. After years of working and dreaming of this project what happened literally caused me to gasp. The end of the beam under the" device" moved upwards approx. 1.5mm and once it went past the center of gravity of the balance beam it continued until the other end rested on a piece of wood placed about 1/4" below it. I repeated this over 20 consecutively times.

My concern was then is this just a pulse? So I put a stop over the top of the "device" and turned it on again. The balance beam again rose and after touching the stop stayed in that position until the "device" was shut off. I have repeated this over 150 times in the past 4 days. That has given me the confidence to send this email. On the antigravity sites that I visit there is always info. on weight losing devices (notice I did not use the words ag) but they seem to be long on talk but short on results. Mine works every time. I am taking steps to increase it's power as I understand the principal I am working with as it is on necessary for me to go to step 2 to increase its performance.

Also the "device" is totally self contained , there is no external forces, beams or shields of any kind acting on it. The loss in weight is completely generated from the "device".

To clarify on the "device" loses weight but I can improve it to the point where I can create 0 weight and then a upward force on any object that it is attached to.

I am tremendously excited and will keep all those interest informed of my progress. I intend to create web site and post picture soon. My next generation "device" will be completed in 7-10 days and will available for viewing. I want to share this.

September 18, 2004
From: "Bill"
Date: Tue Sep 21, 2004 5:50 pm
Subject: AG Device Update

I have been getting emails from all over the world. I have also been posting on the yahoo news group site at "antigravity" and "greenglow".As well as the JNLABS yahoo new group site.

Let me update with some info that might help to answer some questions: I have done a smoke test using incense around the device and no unusual patterns were observed.
Voltage is 12 vdc 3-6amps
High voltage IS NOT USED!
Balance beam is aluminum I also have used a wood balance beam device still works.
Device works when cold, thermals are not a consideration.
Suprconductors are not used.
There are no moving parts.
The device is using very strong electromagnetic fields.

The second generation device is nearly completed I will be testing it this week the performance level will increase dramatically.
Thank you for your interest

Portland, Or.

This article comes from

The URL for this story is: