ZPEnergy.com - Tapped ZPE

Tapped ZPE:2 reworked over === This supports the findings of cascading flows of energys which pass into the neutral centers of mass and serve to sustain energy. The idea is that harmonic or enharmonic energy is emitted by the mass or the energy matrix which forms the mass and interacts with the inflowing enery to "create" the multiplicity of subsidiary energies and effects we perceive as gravity, magnetism, electricity, light, heat, sound, physical vibration and "static" mass aggregations.

There is truly a "blending" of energy at this zone, in a magnetic flux that has a lock on the energys, Magnetic flux waves. was found inside the loop as well as ball like waves stoping on the loop giving amps and volts . the load was a moter . It ran in a state of levation on the load with the loop. in this state is where it can lock in a magnetic wave and blend in with other magnetic waves the waves are interlocked at this state altering other waves with it. the balls will be stoped at peak power. then the amount of spacing controls the power that is taken out of them . it then can run on its own.,,the magnetics can then push and pull at the same time with touch of steel probe that has been in the wave . magetics can be passed by touch to other probes yeilding the same magnetic pattern to other probes , giving them the push pull, off of the ends. this is what i have found "This field opens the gate to the energy sea where energy is able to flow from an into the magnetics receiving coils.., ``Imagine the entire universe permeated with a constant magnetic field'' .........,but on with the magnets i can make with the moter,, i call it the Zpe Magnetic machine,it runs on about 12volts AC 150-200ma 50-60 hz with dead AA DC battery to "start it" ... i have to condition permanent magnets to make this machine " Tune in " so to say .... so really other than the way of making it , it is like and works on the same thing as his but mine worked with Hot and or Cold current....mine was made alot diffrent than his..

[Ed: Whos ??]

These are some of the effects i have noted from the machine....
moter i used was floating when running
it took 20,mins to get it started
it makes alot of staic energy on things
it makes light bulbs very hot with out any light,
it runs with shorted out wires.
it uses magnets "conditioned" .
it runs on its own,after started.
the moter when took off of the machine is locked up with magnetics ,after turning one time it is free.

Brian Prater at cavetronics

[Ed: Data ?? Links ??]

This kind of information should be backed up by device descriptions (hyperlinked). And preferably also measurements. Unsubstantiated posts only do the real researchers in this area unjustice. I urge the 'Anonymous' poster to add links to this post under comments.