Homopolar generators usually have a single disk or drum rotating in a
stationary magnetic field with sliding contacts. The sliding contacts often
present high resisitance however. The construction and operation of
homopolar machines for electric propulsion of marine vessels or railguns for
example is already well known. Such machines include motors and generators
wherein electrical current flows through a conductor situated in a magnetic
field during rotation of the machine rotor. In the case of a homopolar
motor, the current will develop a J x B force perpendicular to the direction
of its flow through the conductor and that of the magnetic field. In the
case of a homopolar generator, a voltage dependent on the rotational speed,
magnetic field, and radius, is induced in a conductor moving within the
magnetic field. When current is drawn from the homopolar generator, it also
develops a J x B force for the same reason as with the motor but is referred
to as back torque or armature reaction. General reference information
including basic principles used to reduce back torque can be found in The
Homopolar Handbook by Thomas Valone (ISBN 0-9641070-1-5).
The prior art rarely includes a one-piece homopolar
machines that rotate the magnet with the disk. Even more unknown is the
concept of rolling contacts. Eliminating sliding contacts is shown in the
"Planetary Homopolar Generator," IBM Technical Disclosure
Bulletin, Vol. 17, No. 6, p. 1786-87, Nov., 1974, H. D. Varadarajan. Using
a conducting belt or rolling contacts to gather current from a magnetic field
flux cutting rotor, there is an annular magnetic field through which the rotor
executes a planetary motion. The large stresses resulting from the centrifugal
force of the massive, unbalanced planetary rotor is a distinct disadvantage,
prohibiting high speed operation. Thus, only a low rate of rotation is
possible with the IBM design. The "Direct Current Homopolar Machine"
U.S. Pat. No. 5,587,618 to Hathaway demonstrates an analogous concept of
relative motion between conductive orbiting shaft and a stationary disc-shaped
magnetized armature. Science Applications International Corporation claims an
obvious conductive belt, dual disk "Homopolar Motor-Generator" in
U.S. Pat. No. 5,241,232 to Reed that was already invented as the "Dynamo
Electric Machine" of U.S. Pat. No. 406,968, patented by none other than
Nikola Tesla in 1889, also with two unipolar magnetized rotors connected by a
conductive belt. The belted dual unipolar machines solve one of the problems
that plague the field by offering two sliding contacts at the low speed
surface on the axle. However, the present invention requires only one sliding
contact on the axle. These conductive belt machines also demonstrate, in
principle, the concept of a multi-rotor, planetary design, by the process of
coordinate transformation, since relative motion is the key to the operation
of a homopolar generator. The concept of rolling contact is demonstrated with
the Dalen "Dynamo Electric Machine" U.S. Pat. No. 645,943, where two
disks are turning in opposite directions while in contact with each other at
their periphery. However, the axle of each disk must remain fixed in place
whereas each axle is in orbiting motion in the present invention. The Roshchin
machine Russian Pat. No. 2155435 contains a basic concept of magnet rotors
orbiting a circular stator but does not include the intimate electrical
contact necessary to utilize the homopolar generation of the present invention
or to initiate a homopolar motoring effect.
Homopolar machines can reversibly function as motors as well such as flywheels
and used as energy storage devices. First used in
transportation applications in the 1950's, flywheel powered buses were
designed to have the flywheel accelerated at every stop. Composite rotors
currently have been developed which can spin at very high revolutions (100,000
revolutions per second); and the speed is limited by the tensile strength of
the rim of the rotor. By using a multi-rotor design, the centrifugal forces of
a large disk can be greatly reduced and still maintain high energy storage or
production. By using magnetic bearings, the friction on the axis of the rotor
can be reduced sufficiently so that such rotors can maintain most of the
energy for several days. Electricity can then be tapped, as with a battery, on
demand.
The IBM Varadarajan planetary rotor is unbalanced and has a low rate of
magnetic flux cutting due to its annular magnetic field design. The Hathaway
direct current machine has unbalanced conductive material orbiting the central
magnetized disk which limits the rotational speed. The conductive belt designs
can be subject to oxidation and slippage, even requiring a toothed timing belt
on each axle as well. With most disk models of homopolar generators, as
opposed to drum designs, sliding contacts are the single most important
contribution of resistance inhibiting the power output of the machine.
Internal resistance is the only limit to the output capability of a homopolar
generator and it is important to reduce all sources of internal resistance to
obtain maximum power output for a given input torque. Rather than use high
resistance carbon brushes, medium resistance silver-graphite brushes or
dangerous conductive liquids such as mercury, low temperature solder, or
sodium-potassium, there is a need to eliminate frictional sliding contact at
the high speed periphery of the magnetized rotor completely. Furthermore,
rather than maintaining two sliding contacts which contribute friction and
resistance, even in the rolling and belted designs, there is a need to cut the
number in half to only one high current sliding contact. The present invention
satisfies both of these needs.
Summary of the Invention
The primary object of the invention is orbiting multi-rotor cylindrical
magnets in rolling contact that eliminates friction while generating DC
electricity.
Another object of the invention is to provide high efficiency, low noise
and low resistance in a high generator.
Another object of the invention is that it uses readily available materials
in a dynamically balanced arrangement.
A further object of the invention is safety through reduced internal stress
than comparable homopolar machines with a single rotor.
Yet another object of the invention is that it provides distributed
generation around an air core.
Other objects and advantages of the present invention will become apparent
from the following descriptions, taken in connection with the accompanying
drawings, wherein, by way of illustration and example, an embodiment of the
present invention is disclosed.
The present invention comprises an improved homopolar machine with
dynamically balanced, axially parallel, cylindrical, electrically conductive
magnets arranged circumferentially around the vertical axis of central stator
ring. Such a design can be referred to as distributed generation since each
magnet rotor generates only a fraction of the current that is transmitted
through the machine. Thus, the conductive bearings contacting the center of
each end of the magnet rotors may carry only one tenth or less of the total
current. The multi-rotor homopolar also does not include sliding contacts at
each magnetized rotor rim but instead utilizes a suitable rolling means
attached separately to magnets and also to the stator ring for intimately
contacting and engaging non-slip rolling between magnets and stator as they
orbit around the stator. The magnetized rotors maintain rotational synchronism
and equal relative position to each other with a bearing means rotatably
securing the top and bottom end of each magnet to a corresponding electrically
conductive circular endplate. The electrical energy is extracted, or inputted
if used as a motor, through contacts on the conductive stator and at the
machine's electrically conductive axle located in the center of the machine
while rigidly attached to the top circular endplate that rotates with all of
the individually magnetized rotors. The only high current, moving contact that
is required is a single electrically conductive thrust bearing that supports
the central axle. An insulating thrust bearing meanwhile separates the axle
from the center of bottom circular endplate. The stator, which is of course
stationary, accomplishes the second contact means through a standard
electrical connection with no need for any relative motion sliding contact.
The stator may be optionally magnetized in the opposite direction to the
magnetized rotors in order to improve the coercive force or magnetic flux
density of the rotors by closing the magnetic circuit.
The drawings constitute a part of this specification and include exemplary
embodiments to the invention, which may be embodied in various forms. It is to
be understood that in some instances various aspects of the invention may be
shown exaggerated or enlarged to facilitate an understanding of the invention.
More information
Experimental Research of the Magnetic-Gravity
Effects with Magnetic Energy
Converter (MEC) by V.
V. Roschin and S.
M. Godin
Roshchin-Godin
article about Physical Effects in a Dynamic Magnetic System (http://users.erols.com/iri/Roshchin_Godin.PDF)
Summary
of MEC Research Proposal (http://users.erols.com/iri/MECProposal.htm)
- Contact EPS CEO Ivan Kruglak at ivan@ionsky.com for
complete proposal
US Patent and Trademark Office Website for Patent Number Search http://patft.uspto.gov/netahtml/srchnum.htm