2nd PoC Experiment Progress Bulletin!
Date: Monday, June 06, 2005 @ 22:34:23 UTC
Topic: Devices
We have now completed the initial phase of testing of our 2nd proof-of-concept experimental setup, using the original experiment's +/-500-volt source module (solid state dc-dc converter, 1.5W), and are able to apply the source's full unballasted output across the stator plate induction rings without shorting problems.
While the induced anode ring voltage is much lower than in the 1st PoC Experiment, due to the action of the capacitor plates added to the armature ("rotor"), we can see that the performance of this prototype 24kW EDF Generator primary power system increases sharply as the induction rings' voltage is raised.
It must be noted here that, in this initial test series, we are already producing 85% of the induced armature voltage we will need to show an output COP of 1.0, using under 1 watt of input power from the 'smallest' module available - and this voltage is over 40% of that which will be required to operate the completed 24kW Generator prototype at its full rated output . . . For more information, please visit our Energy Systems News page (http://www.stardrivedevice.com/news.html).
|
|