 |
There are currently, 658 guest(s) and 0 member(s) that are online.
You are Anonymous user. You can register for free by clicking here
| |
| |
Longitudinal Electroscalar Radiation (LES)
Posted on Saturday, August 30, 2003 @ 18:07:06 UTC by vlad
|
|
Interesting exchange of ideas and experimental results on LES (from Sweet-VTA Yahoo list):
Dear Mr. Vlaenderen,
I have finished my experiment about divergent current as LES wave source. It seems that LES waves is truly exist, it can be detected by using a bifilar coil. There is one additional requirement, which is the divergent current must be in "standing wave" condition. Only in this "standing wave" condition the bifilar coil can pick the signal up. This makes a question about VTA magnet conditioning : how could the magnet conditioned to make such "standing wave" ?
Wicaksono
> Dear Wicaksono,
>
> I congratulate you with your results.
>
> Needless to say that I am very curious about
> your experiment setup, and the tests you have done.
> Maybe you are willing to describe how you make a standing wave
> of divergent/convergent currents?
Yes of course, this is a very easy to do process. In electrical
engineering courses it is known that improperly terminated electric
conductor will make electric standing wave if it is connected to
voltage source. To create divergent currents standing wave you only
need a circular shaped sheet conductor, with one electrode in the
center and one electrode in the edge. This configuration will make
divergent current, but to create divergent current standing wave you
have to use voltage source with half wavelength frequency equal to
sheet conductor radius. For example, if the conductor radius is 1
meter then the voltage source wavelength should be 2 meter, which
translate to 150 MHz frequency.
> My idea how Sweet conditioned his magnets:
> the magnet to be conditioned should rotate in an alternating
> conditioning B field. The rotation axis should be parallel
> to the B field direction.
> The combination of a rotation with velocity v, and conditioning field B,
> creates a "motional" electric field E = vxB, exactly according to
> Sweet´s theoretical outlines (just ignore the theories of others such as
> Bearden and Cat).
> This motional E field also induces polarization currents that flow
> into the direction of the rotation axis (convergent polarization current),
> or into the opposite direction (divergent polarization current).
> Therefore (in theory) also a scalar field is induced.
Alternative to rotating the magnet, is it theoretically possible to
substitute E field from magnet rotation with a radial E field (center
to edge) from DC voltage source ?
> The cooling effect in conducting wires or other materials could be
> a scalar field effect. A scalar field that acts on a charged particle
> is a longitudinal force. This means that the charge is accelerated
> or decelerated into its original direction of movement.
> This is in sharp contrast with the effect of a magnetic field on a charge;
> the force of a magnetic field on a charge is directed perpendicular to
> the original motion of the charge, therefore a magnetic field can not
> accelerate or decelerate the charge and only the direction of motion is
> changed. Therefore the scalar field can have a cooling effect (deceleration of
> charges) and induce also charge density waves of the conduction electrons,
> which is a 'novel' type of power transport.
> Charge density waves are subject of very modern research projects.
>
> In Tesla´s magnifying transformer (the Tesla coil) I suppose
> in the ball shaped condensor, that is attached to the secondary coil,
> a standing divergent current wave can be induced, depending on its
> geometrical shape.
Yes I agree with you, the ball electrode is similar to circular sheet
conductor, I hope Tesla put the wire connection in center of ball to
maximize the standing wave.
> Also, a small initial signal in a bifilar bucking coil can be
> amplified by a scalar field, and not by a magnetic field.
This is new for me, I have to make an experiment with this.
> Wicaksono, are you sure that a scalar field signal is picked up by the bifilar coil,
> and not an electric field signal?
> A capacitive coupling between bifilar coil and your standing-current-wave-device
> can also be an explanation for the signal in bifilar coil.
Actually I used an isolated transmitter - receiver setup, so electric
field coupling is negligible. But you are right, this must be
verified. I will verivy this with another bifilar coil which have
different wire length. If the signal comes from LES, different wire
length should make different result. If it comes from E field
coupling, the result should be the same for different coils.
> Regards,
> Koen
Wicaksono
|
| |
|
Don't have an account yet? You can create one. As a registered user you have some advantages like theme manager, comments configuration and post comments with your name.
| |
Average Score: 5
Votes: 1
| |
|
|
No Comments Allowed for Anonymous, please register |
|
Re: Longitudinal Electroscalar Radiation (LES) (Score: 1)
by vlad on Saturday, August 30, 2003 @ 18:34:32 UTC
(User Info | Send a Message) http://www.zpenergy.com | > Dear mr. Wicaksono,
>
> Very clever experiment.
> Did you connect multiple wires to the outer edge?
> For instance a coax cable has a core wire and a
> woven layer of thin wires at the outside.
> One can use the many thin wires to connect to
> several spots at the edge of the circular shaped sheet conductor.
> The core wire can be connected to the centre of the sheet conductor.
Yes, this is needed to make the current diverge equally to outer edge
direction.
> If I collect the proper equipment (wave generator, etc...)
> then I could do this experiment as well.
Speak about equipments, this is also a burden to me. The truth is I
used a "modified circular sheet conductor". You see, I used common
signal generator, with maximum frequency about 20 MHz. If I used a
circular sheet conductor, the radius would be 7.5 meter, so the
experiment must be done in open field. To reduce the radius, I used
Tesla pancake (flat) coil, actually it is 2 anti-paralel Tesla coil
stacked together (one coil wound in clockwise direction, another in
counter clockwise direction) so the magnetic field is eliminated. My
coil's wire length is about 9 meter, so the half wavelength frequency
is about 16-17 MHz. It is easier to do than using a circular sheet
conductor.
> The half wave lenght condition is interesting.
> Jean Naudin uses a similar circular sheet for creating ball plasmas
> in a magnetron.
> http://jlnlabs.online.fr/plasma/gmr/index.htm
> Suppose the sheet radius is half the wavelenght
> of the magnetron signal, and suppose the sheet conductor is
> rotated inside of the magnetron, then by the Faraday effect a
> convergent/divergent current is induced. Perfect scalar wave device.
> The only problem is to rotate the disc, maybe by using a piece of elastic wire,
> or by drilling a hole in the magnetron and stick a plastic motor
> axis through the hole.
I just know this from you, this looks like a converter from TEM wave
to LES wave. In my opinion, it is not necessary to rotate the disc /
sheet. The 1/4 wavelength carbon antenna acts as converter from TEM
wave to a current source which is attached to the center of circular
sheet. Contrary to my experiment with 1/2 wavelength (it is also
called short circuit 1/4 wavelength) radius circular sheet conductor
with voltage source, Mr. Naudin use 1/4 wavelength open circuit
circular sheet conductor with current source (the carbon antenna).
This is a vice-versa version of my experiment.
> Mr. Wicaksono, thank you for trying to prove the existance of
> scalar field effects.
> If you really can exclude an electric or magnetic coupling to the
> bifilar coil, then the results are very scientific and interesting.
Yes, this will be the next experiment.
> Koen
Wicaksono
|
|
|
Re: Longitudinal Electroscalar Radiation (LES) (Score: 1)
by ElectroDynaCat on Saturday, August 30, 2003 @ 18:38:36 UTC
(User Info | Send a Message) | | Not as much as a comment, as a a question. This whole article just reminded me of a remark made by somebody in the FE community about the wave nature of the ZPE. Can the ZPE be classified as a traveling wave, reflective wave or a standing wave? I believe the popular sentiment at this time is to characterize ZPE as a standing wave. Can someone else back me up on this? |
Re: Longitudinal Electroscalar Radiation (LES) (Score: 0)
by Anonymous on Saturday, August 30, 2003 @ 22:38:24 UTC | It is my intuition that every conceivable waveform is already superpositioned within the ZPE. You can only accentuate or eliminate them.
Alfven Waves and Alfven Pulses are naturally occuring on a cosmic scale so it stands to reason if you mimic these processes you can tap the creative force.
This all has to do with what I learned in the book THE BIG BANG NEVER HAPPENED by Eric J. Lerner who also invented the plasma focus - I think
If you don't believe in Big Bang theory free energy is alot more plausible.
Matty |
]
|
|
|
|
